DEGREASER
REMOVES OILS
STAINS FROM CONCRETE DRIVEWAYS.
CLEANS UP OIL SPILLS IN SOIL, SAND & GRAVEL.
CLEANS UP OIL SPILLS ON HARD SURFACES.
EC-1800 is a natural,
environmentally friendly formulation for use in removing fresh and aged
oil stains, rust and other petroleum based products from
concrete,
asphalt, wood, metal, porcelain, plastics, gravel, soil, sand,
railroad ballast, textiles etc.
EC-1800
contains beneficial microbes and a blend of surfactants,
rust inhibitors, and nutrients all selected for their
synergistic qualities and effectiveness in deep cleaning
surfaces contaminated with petroleum hydrocarbons etc.
EC-1800 is effective in cleaning and digesting oil spills
and stains containing gasoline, diesel, stove oil, crude oil, motor
oil, benzene, toluene, ethyl benzene glycol, xylene, etc.
| Form: |
Liquid -
Natural |
| Color: |
Blue |
| Nutrient
Content: |
Biological nutrients surfactants & stimulants |
| Specific
Gravity: |
1.0 |
| pH: |
6.5 - 7.5 |
| Solubility: |
99.99 % in water |
EC-1800 IS SAFE FOR USE ON ANY SURFACE THAT IS COMPATIBLE
WITH WATER
BENEFITS
•
Biodegradable.
•
Non Toxic - Non Hazardous.
•
Non Flammable.
•
Non Combustible.
•
Non Corrosive -
Contains corrosion inhibitors.
•
Does not contain VOC’s.
•
Environmentally safe alternative to solvent
based cleaners.
•
Contains no petroleum distillates.
•
Deep cleans surfaces – Provides visible results in minutes.
•
Fast drying.
•
D-Limonene free.
•
Leaves no residue.
• Enhances the natural degradation processes.
• Eliminates unsightly areas.
• Reduces potential liability.
• Lowers disposal costs.
• Certified for use in Southern California.
•
Can be used in concentrated form or diluted form.
TYPICAL APPLICATIONS
•
New and aged hydrocarbon spills
•
Railroad ballast
•
Liquid loading in gas wells
• Concrete floors, sidewalks, parking lots, storage
tanks, filling stations, docks, oil platforms etc.
• Hydro electric transformers, sumps, machinery,
aircraft, rolling stock, etc.
• Parts washers
• Pressure washer
• Ultrasonic cleaners
EC-1800 CAN BE APPLIED USING THE FOLLOWING TECHNIQUES
•
Spraying
•
Pouring
•
Circulation overflow
• Pressure Washing
• Ultrasonic Cleaning
• Parts
Washer
•
Dipping
•
Soaking
• Brushing
•
Sponging
• Wiping
|
TYPICAL APPLICATION PROTOCOL - HEAVY AGED STAINS
Step 1.
Apply concentrate to the affected area. Keep the surface wet
by applying a diluted solution of EC-1800 & water or
water alone while the product loosens deposits.
Step 2.
Allow sufficient time for the product to loosen or dissolve
deposits. For aged stains and rust, agitate using a fiber
pad or brush, to loosen deposits and speed removal.
Typically, the longer the contact time, the less agitation
will be required.
Step 3. Rinse with water. Where rinsing
is not possible, wipe the treated surface with wet cloth or
sponge.
NOTE:
Application can be carried out with the aid of a hand
sprayer, conventional sprayer, pressure washer etc.
Application rate, penetration
time and
retention time is
determined by type of surface, surface temperature and type
of contaminant. WARMER TEMPERATURES WILL REDUCE
CLEANING TIME |
|
TYPICAL APPLICATION PROTOCOL - GENERAL CLEANUP
EC-1800
is highly concentrated. Dilution rates are
determined by type of surface, surface temperature and type
of contaminant. EC-1800
may be used in concentrated form and at dilutions of up
to 1:100.
Application can be carried out with the aid of a hand sprayer,
conventional sprayer or pressure
washer.
Step 1. Dilute EC-1800 at the
appropriate rate and spray the affected area.
Step 2. Allow 5 to
10 minutes for the solution to penetrate the surface.
Step 3. Rinse with water.
EC-1800 can be diluted
for use in aqueous parts washers, ultrasonic cleaners and
pressure washers. Dilution rates may vary from 1:100 to
1:200 depending on application.
EC-1800 is safe for use
on textiles.
| PACKAGING
1 Litre HDPE
Jugs
4 Litre HDPE Jugs
20 Litre HDPE Pails
208 Litre HDPE Drums
SAFETY
The materials used in the production of EC-1800 are derived
from naturally occurring and sustainable sources. EC-1800 is
non-caustic, non-corrosive, non-flammable and
environmentally safe. In addition, It is not harmful to
animals, plants and humans.
COMPLIANCE
Fully complies with EPA Toxic Substance Control Act (TSCA)
and the rules, orders and regulations promulgated there
under including:
a) Sections 4, 5, 6 & 7; Title 40 Chapter 1, 707.20 thru
707.75;
b) 40 CFR Sections 704.3. 710.2(e) and 720.3(c); and
c) Sections 5 and 13, reference 42FR64583
d) Does not contain marine
pollutants as defined in 49 CFR 171.8.
STORAGE &
HANDLING
DO NOT FREEZE! - Store in
a cool location. (SEE MSDS)
Oil Spill Cleanup Info
Product: EC-1800
Product Code:
6618
Designation: Commercial /
Industrial
Application:
Natural Degreaser / Hydrocarbon Degrader
Packaging:
1, 4, 20, 208 Litre HDPE Containers
Form:
Liquid - Super Concentrate
.gif)
For
technical data or a personalized quote,
contact us at:
Tel: 1-403-854-3617 /
1-403-854-2005
(8 am-5 pm MST
Weekdays)
Fax: 1-403-854-4186
Email:
|
|
OUR MAIN FOCUS IS ON
PROVIDING YOU WITH THE FINEST PRODUCTS BACKED BY SUPERIOR CUSTOMER SERVICE.
|
|
.gif){kind=small}
OIL
SPILL CLEANUP PRODUCTS
Insitu Soil Treatment
