|
.gif)
ANTI FUNGUS SURFACE PROTECTANT
TOXIC BLACK MOLD TREATMENT |
|
Fungal Shield is NOT a fungicide. It is an anti fungus surface treatment designed
to provide long term protection against the growth and adhesion of toxic black
mold, mold, mildew, fungus and algae. Fungal Shield is safe for use on any surface, indoors or outdoors. When used as directed, Fungal
Shield prevents the penetration and adhesion of mold, mildew, fungus, algae and airborne contaminants (food for growing organisms) and restricts moisture penetration. When deprived of anchorage, food and moisture, mold, mildew, fungus and algae cannot survive. In addition, Fungal
Shield keeps surfaces looking like new by resisting water penetration and waterborne stains, including rust and well water stains.
APPEARANCE
Clear liquid.
SURFACE REQUIREMENTS
Fungal Shield works on any surface that allows penetration and adhesion of water based
contaminants including concrete, stone, brick, tile, grout, painted surfaces, roofing tiles, shingles, painted or treated wood etc. Fungal Shield can be applied to dry or
slightly damp surfaces and is recommended as a final treatment.
Table I.
Examples of Substrates Treatable with Fungal Shield
| Siliceous Surfaces |
Natural Fibers |
Man Made Fibers |
Metals |
Miscellaneous |
Glass
Glass Wool
Sand
Stone
Brick
Concrete
Ceramic |
Cotton
Wool
Linen
Felt |
Acrylic
Polyester
Cellulose
Acetate
Rayon
Spandex
Vinyl
Dacron
Viscose
Nylon |
Aluminum
Steel
Galvanize |
Leather
Wood
Rubber
Formica
Plastic |
SURFACE PREPARATION
Surfaces to be treated should be thoroughly cleaned of all fungus &
algae, as well as dust, dirt and other contaminants, in order to guarantee adequate penetration and adhesion.
APPLICATION PROCEDURE
Dilute at a rate of 1:9 in water. Apply with the aid
of a brush, roller, airless spray or pump up sprayer. Apply Fungal
Shield uniformly, ensuring even coverage. Excess material may dry leaving a whitish appearance.
CURING
Typically, Fungal Shield will dry to the touch within 1 to 2 hours and
will totally cure within 18 to 24 hours. Treated surfaces resist darkening from water penetration within 1 to 2 hours after application. Water resistance is an indication of uniform coverage. If good water resistance is not uniformly apparent within 24 hours after application, a second light coat may be necessary. Isolated missed spots may be individually touched up.
CLEANUP
Clean hands and tools thoroughly with soap and water before Fungal Shield dries.
BENEFITS
 Water-based silane mixture - Does not contain methanol
Safe, simple and economic to use
Extended shelf life
Stable in water
Low toxicity
Non Flammable
Disperses
uniformly
SAFETY
Fungal Shield is environmentally friendly. It is water based and suitable for many new industrial applications.
PREPARING
"READY TO USE SOLUTION"
Dilute in water at a
rate of 1:9
1 Litre 10 x Concentrate yields 10 Litres RTU Solution.
TYPICAL COVERAGE RATE
125 sq. feet / Litre RTU Solution
PACKAGING
1 Litre HDPE Jugs (10 x Concentrate)
4 Litre HDPE Jugs (10 x Concentrate)
20 Litre HDPE Pails (10 x Concentrate)
COMPLIANCE
Fully complies with EPA Toxic Substance
Control Act (TSCA) and the rules, orders and regulations
promulgated there under including:
a) Sections 4, 5, 6 & 7; Title 40 Chapter 1, 707.20 thru
707.75;
b) 40 CFR Sections 704.3. 710.2(e) and 720.3(c); and
c) Sections 5 and 13, reference 42FR64583
d) Does not contain marine
pollutants as defined in 49 CFR 171.8.
|
OUR MAIN FOCUS IS ON
PROVIDING YOU WITH THE FINEST PRODUCTS BACKED BY SUPERIOR CUSTOMER SERVICE.
|
For
technical data, a personalized quote or anything else,
please contact us at:
Tel: 1-403-854-3617 / 1-403-854-2005 (8
am-5 pm MST)
Fax:1-403-854-4186
Email:
| .gif){kind=small}
NATURAL WWT PRODUCTS
.gif){kind=small}
